Après Ski

1L covers 8m² with two coats depending on the surface and application method

Available in 100ml, 1L, 4L, and 10L

Low Sheen (6%)

92

All Tint™ paint products are backed by our Lifetime Warranty. Read our Warranty Policy here

Download SDS and PDS

Suitable for walls and ceilings in wet areas like bathrooms and laundries

1L covers 8m² with two coats depending on the surface and application method

Available in 1L, 4L, and 10L

Semi-gloss (20-25%)

92

All Tint™ paint products are backed by our Lifetime Warranty. Read our Warranty Policy here

Download SDS and PDS

• Suitable for both interior and exterior trims, windows, doors, furniture, cupboards and cabinets
• Requires 7 days to fully cure. Paint may damage if knocked before fully cured

1L covers 8m² with two coats depending on the surface and application method

Available in 1L, 4L, and 10L

Low Sheen (10%)

92

All Tint™ paint products are backed by our Lifetime Warranty. Read our Warranty Policy here

Download SDS and PDS

• Not recommended for exterior doors. Instead, we recommend using Tint™ Trim
• Not recommended for exterior windows that open. Instead, we recommend using Tint™ Trim. However, Exterior is suitable on window frames that are stationary and don't open

1L covers 8m² with two coats depending on the surface and application method

Available in 1L, 4L, and 10L

Flat (0%)

92

All Tint™ paint products are backed by our Lifetime Warranty. Read our Warranty Policy here

Download SDS and PDS

Not recommended for bathrooms, laundries or areas with high humidity. For these areas we recommend using Tint™ Wall, which features anti-mould technology

Bare surfaces:

• Clean with warm, soapy water, let dry, then apply at least one coat of Prep Plus
  
  

Painted surfaces:

• Repair any cracks or holes, clean with warm, soapy water and allow to dry. If painting over an oil-based coating, give the surface a gentle sand and apply at least one coat of Prep Plus

Apply two coats with a brush, roller or spray gun. If spraying, dilute with up to 10% water to achieve proper atomisation

• Touch dry in 30 mins
• Recoat in 2 hours

Full strength achieved after 7 days. Paint may damage if knocked before fully cured

Only paint between 10˚C and 30˚C

Clean, warm water if paint is fresh. If paint has dried, use methylated spirits

Spot clean stains and spills with warm soapy water, then let air dry

• Paint <1 g/L
• Colourants <1 g/L

Certified Very Low VOC by the CSIRO’s Australian Paint Approval Scheme (APAS)

Formaldehydes, glycol ethers, phthalates, silicones, teflon, and crystalline quartz silicas

100% cruelty-free, vegan paint

Don’t pour excess paint down the sink. Leftover paint and empty paint cans can be recycled at your local Paintback centre. Find out more here

• Paint <36 g/L
• Colourants <1 g/L

Certified Low VOC by the CSIRO's Australian Paint Approval Scheme (APAS)

Formaldehydes, glycol ethers, phthalates, silicones, teflon, and crystalline quartz silicas

100% cruelty-free, vegan paint

Don’t pour excess paint down the sink. Leftover paint and empty paint cans can be recycled at your local Paintback centre. Find out more here

• Paint <48 g/L
• Colourants <1 g/L

Certified Low VOC by the CSIRO's Australian Paint Approval Scheme (APAS)

Formaldehydes, glycol ethers, phthalates, silicones, teflon, and crystalline quartz silicas

100% cruelty-free, vegan paint

Don’t pour excess paint down the sink. Leftover paint and empty paint cans can be recycled at your local Paintback centre. Find out more here

• Paint <1 g/L
• Colourants <1 g/L

Certified Very Low VOC by the CSIRO's Australian Paint Approval Scheme (APAS)

Formaldehydes, glycol ethers, phthalates, silicones, teflon, and crystalline quartz silicas

100% cruelty-free, vegan paint

Don’t pour excess paint down the sink. Leftover paint and empty paint cans can be recycled at your local Paintback centre. Find out more here

Try samples around your home, as what works in one space may not in another.

View colours separately before comparing sets as some colours just need a bit of space.

View samples in natural light first as subtle shifts in ambient light can reveal a colour’s true tone, then try them with artificial light.

You should feel comfortable with your colour choice in all lighting conditions.

All Tint™ samples come in the same Low Sheen finish we use in our Tint™ Wall paint

Tint™ Sample Cards and Sample Pouches are handmade using Tint™ Wall paint for 100% colour and finish confidence.

While Tint™ Sample Stickers are not made using our paint, their colour and finish is carefully controlled to exactly match our Tint™ Wall finish.

Our A5 Sample Cards are big enough to showcase a colour, and small enough to move around easily. Use Blu-Tac™ or double-sided tape to attach to a wall

Sample Stickers have a peel-and-stick adhesive back that make it easy to sample without any mess.

The adhesive is specially designed to be moved without damaging your wall, so feel free to stick with abandon.

Sample Stickers are also flexible enough to wrap around corners or other features.

Sample Pouches come with 100ml of our Wall paint, enough to paint a 50x50cm patch with two-coats using a brush or roller.

Just like regular paint, if you’re drastically changing colour (e.g. Red -> White) you may need to apply three coats to get full colour coverage.

Or you can apply a coat of Prep Plus first if you have some on hand, but don't stress if you don't — it's not necessary when you're just exploring colours.